RCDs, RCBOs, SPDs and AFDDs explained
An RCD (residual current device) detects current leaking to earth, for example through a person, and disconnects within milliseconds. Older split-load boards use one or two RCDs to protect groups of circuits; the downside is that a single fault trips every circuit on that side. An RCBO combines an RCD and a circuit breaker in one device for each circuit, so a fault on the kitchen sockets doesn't plunge the house into darkness. For most homes, RCBOs are now our standard recommendation.
A surge protection device (SPD) protects against voltage spikes from lightning strikes or switching on the network, which can damage electronics such as boilers, TVs and smart devices. BS 7671 now requires surge protection in most cases. An AFDD (arc fault detection device) detects the electrical arcing caused by damaged cables or loose connections, a common cause of electrical fires. AFDDs are required on certain circuits in higher-risk residential buildings, HMOs, purpose-built student accommodation and care homes, and recommended elsewhere. We'll explain whether they make sense for your property.
